Skip to main content

DirectMed Imaging and Tri-Imaging Solutions have Merged to Create a Scaled Imaging Solutions Platform.
Click here to read the announcement.

S301 Switch for CT Gantry

Sep 29, 2020 | Tech Tips, CT, Siemens

There have been some imitators promoting Tech Tip Tuesday’s recently but the originators are continuing to bring you Tech Tip Tuesday’s with another Joe Sam Tech Tip today on the switch S301 in your Siemens rotating gantry. Check it out!

Hi, this is Joe from DirectMed Imaging, coming to you again with another tech tip.

Today, we’re discussing the S301 switch for the rotating gantry. After replacing certain components within the gantry during a tune-up, you may need to perform mechanical adjustments. In this case, you must switch off S301 to prevent the gantry from moving, which helps avoid potential mishaps or serious injuries.

For more tech tips like this, visit DirectMedImaging.com and check out our Resources page. If you have any questions, feel free to reach out.

If you need parts, training or support contact DirectMed Imaging.Now is the time to get hands-on Siemens CT training with our training classes, and learn more.

Questions, Comments, Concerns?

Send Us A Message!